The intelligent high-pressure briquetting machine is an industrial device that uses high-pressure molding technology to compress powdery or granular materials into high-density pellets. Its core structure includes a high-strength mold (red component in the image), a hydraulic pressing system, an intelligent electronic control unit (control box in the image), and a material conveying component. Through a PLC control system, it precisely adjusts pressure (150-300MPa) to achieve efficient compression molding of materials. The equipment adopts variable frequency speed regulation and constant pressure control technology, with pellet density reaching 1.8-2.5g/cm³. It is widely used in resource recycling, energy processing, and other fields, serving as key equipment for material reduction and high-value utilization.
Product Applications
Mining and Metallurgy: Press forming of iron concentrate powder, bauxite, titanium concentrate, etc., improving smelting efficiency (e.g., pellet furnace utilization increased by 25%).
Energy Industry: Coal powder/Lanthanum carbon briquetting (material example shown in the image), replacing loose coal for industrial boilers, reducing transportation costs by 30%.
Environmental Protection: Sludge (moisture content ≤30%) and desulfurization gypsum briquetting, achieving industrial solid waste resource utilization.
Building Materials Production: Clay and refractory material briquetting, enhancing raw material homogeneity (particle size uniformity ±2mm).
Chemical Industry: Fertilizer and pesticide carrier briquetting, controlling release rate (e.g., slow-release fertilizer briquettes dissolve in over 12 hours).
Product Features
High-Pressure Intelligent Molding: Hydraulic system provides stable pressure of 150-300MPa, briquette strength ≥3000N per pellet, resistant to transportation damage.
Wide Material Adaptability: Equipped with variable frequency feeder and atomizing wetting device (spray component shown in the image), suitable for materials with moisture content of 3%-20%.
Energy Saving and Consumption Reduction: Optional waste heat recovery system plus servo motor drive, reducing energy consumption by 18%-25% compared to traditional briquetting machines.
Fully Automatic Operation: Touchscreen plus remote monitoring (APP supported), fault self-diagnosis (e.g., automatic reverse clearing when mold blockage occurs).
Environmental Design: Fully enclosed chamber with pulse dust removal interface, dust emission <15mg/Nm³ (compliant with GB 16297 standard).
Product Functions
Efficient Briquetting: Double mold opposing pressure design, forming cycle ≤8 seconds per pellet, QH1200 model capacity reaches 1.5-2.5 tons/hour.
Precise Density Control: PLC system adjusts pressure in real-time, briquette density fluctuation <±0.02g/cm³, improving stability of subsequent processes.
Intelligent Lubrication: Constant pressure thin oil lubrication system (blue oil pipe shown in the image), bearing life extended by 40%.
Safety Protection: Hydraulic overload protection plus emergency stop interlock (compliant with GB 5226.1), automatic material cut-off when mold opens/closes.
Modular Design: Quick-change structure for molds and liners (<30 minutes), reducing maintenance costs by 35%.
Product Technical Parameters (Typical Configuration of QH1200)
| Parameter Items | QH1200 |
| Forming Pressure | 150-300MPa (adjustable) |
| Briquette Diameter | Φ50-120mm (mold optional) |
| Production Capacity | 1.5-2.5t/h |
| Motor Power | Main Drive: 110kW; Auxiliary Drive: 15kW |
| Equipment Weight | ≈18t |
| Dimensions | 4200×2800×3500mm |
Keywords
Intelligent High-Pressure Briquetting Machine
Contact Information
Product Categories
Related Products
Related Products
Ball mill
Ball mill
Rod Mill
(Semi) Autogenous Mill
Mining Hoisting
Single-rope Winding Mine Hoist
Multi-rope friction mine hoist
Well Drilling Hoist
Supporting Equipment
Mining Washing and Selection
Selective Crusher
Centrifuge
-
WLL Series Coal Slime Scraper Discharge Centrifugal Dehydrator
-
WZY Series Dual-Mass Horizontal Vibrating Centrifugal Dehydrator
-
WZL Series Horizontal Vibrating Centrifugal Dehydrator
-
TWZ Series Horizontal Vibrating Centrifugal Dehydrator
-
LLS-900 Sludge Centrifugal Dehydrator
-
ML Series Coal Slurry Centrifugal Dewatering Machine
-
LL Series Vertical Centrifugal Dehydrator
Flotation machine
Filter machine
Grading Machine
Mining Auxiliary Equipment
Gear Reducer Series
-
Vertical mill gearbox
-
Special reducer for scraper machine
-
Industry-specific gear reducer
-
Bevel Gear Reducer
-
Cylindrical Gear Reducer
-
Planetary Gear Reducer
-
Parallel shaft reducer
-
Industrial General Gearbox Series
-
Helical Gear - Bevel Gear Reduction Motor
-
Helical Gear Reduction Motor
-
Planetary Gear Reducer
-
Cylindrical Gear Reducer
Category One
Category Two
Crusher Series
Rotary Crusher
Jaw Crusher
Impact Crusher
Cone Crusher
Ball Press Machine
High-pressure briquetting machine
Medium and High Pressure Briquetting Machine
Roller Press
Rotary kiln
-
Cement kiln (rotary kiln)
-
Light gray kiln (self-alkali steam calcination kiln)
-
Chemical kiln
-
Oxidation Cooling Kiln
-
Oxidative roasting rotary kiln (oxidation kiln)
-
Lithium Carbonate Rotary Kiln
-
Lime Rotary Kiln
-
Metal Magnesium Rotary Kiln
-
Architectural Lightweight Aggregate Rotary Kiln
-
Cement Rotary Kiln
Cast and forged parts
Large castings
Large Forgings
Transmission Accessories
Gear Coupling
Electro-hydraulic control system
Automation Control
-
GPRS Remote Expert Diagnosis System
-
Metallurgical Electrical Control Equipment
-
Ore Dressing and Coal Washing Automation Control System
-
System Local Modification
-
Doubly-fed variable frequency electric control system
-
All-digital DC electric control system
-
Full digital low-voltage variable frequency feedback
-
Disc Brake Online Detection System
-
Rotary Kiln Control System
Hydraulic System
-
Hydraulic System
-
Hydraulic System
-
Hydraulic System
-
Hydraulic System
-
Hydraulic System
-
Hydraulic System
-
Hydraulic System
-
Hydraulic System
-
Hydraulic System
-
Hydraulic Station
-
Variable Frequency Servo Hydraulic System
-
E119A/E119S E118A/E118S Explosion-proof Secondary Brake Hydraulic Station
-
Constant Deceleration Electro-Hydraulic Brake Control Device
-
TE160/TE161/TE162/TE163 Cartridge Control Two-Stage Brake Hydraulic Station
Hydraulic cylinder
Other accessories
Large welded components
Wear-resistant products
-
Jaw crusher jaw plate
-
New High-Pressure Roller Wear-Resistant Overlay Welding Technology
-
Bus Alloy Bearing Shell
-
Large ball mill ZGMN13CR2 liner
-
Medium chrome alloy liner
-
Manganese Steel Series Products
-
High carbon cast iron parts
-
Low-carbon martensitic steel jaw plate
-
Large self-grinding mill shell liner
Engineering Plastics
-
Elevator modified PP head wheel and guide wheel liners
-
Nylon products
-
Polyurethane products
-
Multi-rope hoist phenolic resin blocks and fixed blocks
-
Imported from Germany—LUWIPLAST GELB848 friction lining
-
Single-rope mine hoist plastic liner
-
WSM-3 New Environmentally Friendly Asbestos-Free Gate Valve (Hoisting Mechanism Brake)
-
KP-09 Ultra-high Molecular Weight Sprocket Liner
-
GDM326 Imported Material High-Performance Friction Lining
Contact Us
No.99 Hengshan Road, Jianxi District, Luoyang City, Henan Province
sweep
CITICTLC
Learn more about dynamic information